As a supplier of chemical pumps for well over 15 years, we know that getting the right solution for your chemical process.

They are classified by different standards: ISO2858/AMSE B73.1/API610.etc,and can choose many type materials,such as stainless steel ,plastics,titanium alloy .etc

and can fit mechncial seal /gland seal ,flushing system according to work condition.

   These pumps can be used for petrochemical industry ,waste water ,acid , alkali liquor.etc 

    To make sure that the chemical transfer pump we select will offer you a long, trouble-free service life, we will ask for full fluid disclosure so that thorough consideration can be given to the materials. Send us your enquiry today.

Chemical Pump

ꅀWANT TO DISCUSS YOUR REQUIREMENTS?
ꅀVIEW ALL PRODUCTS

1.Be designed according to the specifications of API610 (OH1, OH2).

2.Flow rate : up to 2,600m3/h (11,450gpm)Head : up to 330m (1,080 ft)

3.Design Pressure: 2.5~5.0 MPa (363 ~725Psi)

4.Working Temperature: -80 ℃ ~ +450 ℃

5.Inlet Diameter : 25 ~ 400mm

6.Be mainly used in oil refineries, petrochemical industry, cryogenic engineering, mining industry, chemical fiber and general industrial processes, power plants, large and medium-sized heating and air conditioning unit, environmental engineering, offshore industries and desalination plants, etc.

API 610 Chemical Process Pump

ꅀREAD MORE

1.Be designed and manufactured according to ISO 5199 - ISO 2858 ,ASME B73.1.etc

2. Flow rate: up to 2000m3/h  (8,800gpm);Head : up to 160m  ( 525ft)

3.Speed : 2900r/min,1450r/min;Inlet Diameter : 32 ~ 300m

4.Working Temperature : -80℃ ~ +300℃;Working Pressure : 2.5MPa

5.Liquid:  Sulfuric acid, nitric acid, hydrochloric acid, phosphoric acid and other inorganic 

  acid andorganic acid of various temperature and concentration.

Chemical End Suction Centrifugal Pump

ꅀREAD MORE

1.Large flow rate ,good caviatation resistance ,high efficiency with low speed. 

2.Flow rate: Up to 11000m3/h

3.Head : Up to 11m 

4.Operation Temperature :-20~+180℃ 

5.Main used for evaporative crystallization industry,phosphate fertilizer ,metallurgical plant .
6.The overflow parts of pump adopt 0Cr18Ni9, 1Cr18Ni12Mo2Ti, 1.4563,hastelloy , 1Cr18Ni12Mo3Ti, etc. as raw materials as well as some special materials.

 FJX Chemical Process Axial Pump

ꅀREAD MORE

Pump Material

Austenitic stainless steel, duplex steel, C4 steel, titanium alloy, Hastelloy, etc.

Magnetic Material

The magnetic material of the macro sub magnetic coupler is 2:17-grade sm2go17. The maximum reversible demagnetization temperature of the rare earth alloy is 450℃, the magnetic property is stable, it can never demagnetize under long-term high temperature and vibration state, and it will not rust.

Isolation sleeve

Conventional single layer, Hastelloy c-276 material, pressure bearing 2.5-4.0mpa.The dangerous working condition is double layer. The monitoring and protection device is installed in the interlayer. Double layer protection is safer.

 

API685 Magnetic Force Driving Pump 

ꅀREAD MORE
넳 넲

 

All rights reserved©Jiangsu feixiang Electromechanical Manufacturing Co., Ltd